Texas Tech University Grade Calculator

Texas Tech is flat-letter territory: only A, B, C, D and F exist for GPA purposes, worth exactly 4, 3, 2, 1 and 0 points per semester hour. Instructors may write a plus or minus on your transcript, but per OP 34.12 those symbols “will not be used in the calculation of the grade point average” — an A- is still 4.0, a B+ is still 3.0. Run your numbers above.

TTU’s grade replacement is unusually generous: unlimited attempts to replace a D or F (with a tuition penalty after the third), and the Registrar processes it automatically. The pass-fail option covers 13 elective hours — but an F earned pass-fail still hits your GPA.

Calculating…

🎓 Need your GPA instead? Jump to the Texas Tech University GPA calculator (official scale) ↓

Texas Tech grading scale (official)

LetterGrade points
A4
B3
C2
D1
F0

Those five values are the whole GPA system — per the College of Arts & Sciences, “The grades of A, B, C, and D carry with them grade points of 4, 3, 2, and 1, respectively, for each semester hour... All other grades have no assigned grade points.” A plus or minus may show on your transcript but never changes the points. Symbols like P, CR, PR, W and I are excluded from GPA; an I (incomplete) must be resolved within one calendar year or it becomes an F. TTU publishes grade points only — no official percentage cutoffs; OP 34.12 puts the grading method in each syllabus. Source: TTU OP 34.12 — Grading Procedures and Understanding Your GPA, checked 2026-11-01.

Texas Tech University grading scale — official grade points for every letter from the registrar
Texas Tech University grading scale: every letter and its official grade points. Free to reuse with credit and a link to finalsolver.com.

Grade replacement and the 13-hour pass-fail cap

Retake a D or F at Texas Tech and the Registrar automatically initiates grade replacement at the end of the term — no form. There’s no limit on attempts, but after the third attempt in the same course you pay the non-resident tuition rate for every further enrollment. Only the D or F from your most recent attempt counts in your cumulative GPA until you hit a C or better — meaning a retake that ends in F replaces your old D. The original grade stays on the transcript flagged “Grade Replaced,” excluded from GPA and hours, and honors use a “pure” GPA that includes everything.

The undergraduate Pass-Fail Option covers up to 13 elective semester hours: no major/minor courses (unless required), nothing for students on probation, declared by the last day a dropped course automatically gets a W, and irreversible. Pass-fail courses hide your identity from the instructor — and an F in a pass-fail course still counts in your GPA; a P never does.

How the other camp does it: at UT Austin, all grades and hours are used in the GPA — the same retaken C yields a different GPA outcome entirely. UT Austin retake rules →

What do you need on your final?

Needed = (target − current × (1 − weight)) ÷ weight, with weight as your final’s share of the course grade in decimals. Example: sitting at 74% with a final worth 30% of the grade and targeting an 80% overall, you need (80 − 74 × 0.7) ÷ 0.3 = (80 − 51.8) ÷ 0.3 = 28.2 ÷ 0.3 = 94% on the final.

Because TTU has no plus/minus GPA values, every letter boundary is worth a full point — there is no 3.7-vs-3.3 haggling — so the exact percentage line between a B and a C (worth 1.0 grade points) is the whole ballgame, and it lives in your syllabus. If you’re sitting on an I, clock’s ticking: one calendar year and it hardens into an F.

Texas Tech University: GPA credits example

Your Texas Tech University GPA is a credit-weighted average: (credits × grade points) summed ÷ total credits. Worked example on the official Texas Tech University scale: A (4) × 3 credits + B (3) × 4 credits + B (3) × 3 credits = 33 points over 10 credits → GPA 3.3. Texas Tech computes GPA on flat whole letters: 'The grades of A, B, C, and D carry with them grade points of 4, 3, 2, and 1, respectively, for each semester hour. The calculator at the bottom of this page runs this exact table.

Three finals scenarios students actually ask

Static answers, checkable against the calculator above — the three setups that show up every December and May (pass line shown for a typical 70% D; your school's line is in the scale above):

You sit atFinal worthFor a B− (80%)To pass (70%)
85%20%60% — makeable10% — already safe
78%40%83% — study weekend58% — very makeable
60% (bombed the midterm; 30% coursework at 100%)40%80% — a real but winnable fight55% — still passable
Needed = (target − current × (1 − weight)) ÷ weight. An A− from 85% with a 20% final would take 110% — that's the extra-credit conversation, not a study plan. And scenario 3 is why giving up after a bad midterm is usually premature math, not just morale.

Texas Tech University GPA calculator — official scale

Runs this school's exact grade-point table — not a generic 4.0 rounding.

Calculating…

Computed on this school's official grade-point table shown above — no rounding adjustments needed.

Frequently Asked Questions

Do plus and minus grades affect my GPA at Texas Tech?

No. Instructors may add a plus or minus, and it appears on your transcript, but OP 34.12 says those marks “will not be used in the calculation of the grade point average.” GPA math uses flat values only: A = 4, B = 3, C = 2, D = 1, F = 0.

Can I replace a grade at Texas Tech?

Yes. Retake any Texas Tech course in which you earned a D or F and the Registrar automatically processes grade replacement at term’s end — unlimited attempts (non-resident tuition kicks in after the third attempt in the same course). Only your most recent D or F counts in the GPA until you earn a C or better, and the replaced grade is flagged “Grade Replaced” on the transcript but never erased.

What GPA is an A at Texas Tech?

An A is 4 grade points per semester hour — and so is an A-. The full point scale is A 4, B 3, C 2, D 1, F 0, with no plus/minus variants in the math.

Does Texas Tech round grades?

TTU publishes no official percentage cutoffs and no rounding policy — OP 34.12 explicitly leaves the grading method to each course syllabus. GPA is simply grade points divided by semester hours attempted, including hours for an F.

How does pass/fail work at Texas Tech?

Undergrads can take up to 13 elective semester hours pass-fail. Courses in your major or minor don’t qualify (unless required), you can’t use the option on probation, you must declare by the last automatic-W drop day, and you can’t switch back to a letter grade. A P never touches your GPA — but an F in a pass-fail course does.

Can I use the GPA calculator on this site for Texas Tech?

Yes — the calculator on this page runs Texas Tech University's official grade-point table exactly. Weight credits as shown in the "GPA: how the points add up" section below; the general calculator elsewhere on the site uses standard rounding if you ever need a plain 4.0 number.

Does a W look bad when I apply to grad school?

One or two Ws read as scheduling realism, not an ability signal — committees weigh trends and course rigor. A pattern of many Ws invites questions, and a W followed by retaking the course (and acing it) often tells a better story than the C you would have survived.

Can I retake a class I got a C in just to boost my GPA?

Not usually the door it looks like: at Texas Tech, grade replacement covers D and F only — so the C you survived is likely staying. Confirm the exact cutoff in the retake policy above before paying for anything; the cheaper move is usually banking a strong grade in your next course instead of re-buying one you already passed.

More calculators

Compare with other schools

Grading rules vary wildly — Texas Tech University vs other schools with different systems: